- As-built drawings
- Drawings of a building as it was actually constructed, including changes made during construction. Often used loosely for any drawings of the current building.
- Existing conditions
- The building as it stands today, after every renovation and repair since it was built. Existing-conditions drawings are what an alteration is designed on; as-built drawings may already be out of date.
- Point cloud
- A set of measured points, each with a position in space and often a colour, captured by a laser scanner or produced by photogrammetry. Together they describe every surface the scanner saw.
- E57
- An open, vendor-neutral file format for point clouds and their images, readable by most point-cloud software.
- RCP / RCS file
- Autodesk ReCap’s point-cloud formats. An .rcp is a ReCap project that references one or more .rcs scan files; Revit and AutoCAD link them directly. Not the same thing as a reflected ceiling plan.
- Reflected ceiling plan (RCP)
- A drawing of the ceiling as if reflected in a mirror on the floor, so it lines up with the floor plan: light fixtures, diffusers, sprinkler heads, soffits and ceiling heights.
- Registration
- Aligning separate scans or walks into one coordinate system so they form a single, continuous point cloud.
- SLAM
- Simultaneous localisation and mapping: how a mobile scanner works out where it is from what it measures, so it can scan while moving instead of from fixed tripod positions.
- Control point
- A marked point with known coordinates, used to tie a scan to a survey grid or to check its accuracy over a large area.
- GNSS / RTK
- Satellite positioning (GPS and its counterparts). RTK — real-time kinematic — corrections tighten a GNSS position for survey work.
- Scan to BIM
- Building a BIM model, such as a Revit model, from a point cloud of the existing building.
- LOD (level of development)
- How much detail and reliability a model element carries, from LOD 100 (conceptual) to LOD 400 (fabrication). Existing-conditions models are usually LOD 200 or LOD 300.
- LOA (level of accuracy)
- A separate scale describing how closely measured or modelled geometry matches the real building. LOD is about detail; LOA is about accuracy.
- Photogrammetry
- Measuring from overlapping photographs. A drone’s photographs, processed together, produce a 3D model and point cloud of a building’s exterior.
- Ground-penetrating radar (GPR)
- Radar pulses sent into concrete or ground; reflections reveal embedded objects such as reinforcement, tendons and conduit.
— Instant price · live calendar · book online
See your price now. Pick your scan date. Done.
Enter the address: the price comes straight back, the calendar shows real dates, and a deposit confirms the booking. No call needed.
Prefer to talk? Send us a message and we will call you back.